المساعد الشخصي الرقمي

مشاهدة النسخة كاملة : New 2010 wireless hackrs



almaik
04-07-2010, 11:55 PM
[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/d4298706ecad49c71b437628178e029c.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/08ef1fe250a683ac4242468dacd544d2.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/8cfdb206482cab6180b3e332a39f71eb.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/08ef1fe250a683ac4242468dacd544d2.jpg[/url
(based on book with full instruction)

INFO

1) Unzip and install Commview, then paste the included "cv.exe" to the directory you installed it to (c:\program files\commviewwifi)

2) Open commview and install the commview drivers to a card. It should prompt you about your card and than automatically install the driver. It is important that you have 1 card that works with commview or else the rest of the tutorial will not work

3)now go to the "rules" tab and check "enable advanced rules"

4)type in the box labled formula "tods=1 and dmac=FF:FF:FF:FF:FF:FF" then type a **** for your formula in the box labled **** and than click add/edit.

5)it should now appear in the upper box. if it is not checked, check it.

6)now click settings>options>memory usage and turn maximum packets in buffer to 20000 (max). If it prompts you to restart it, do so. There are three funnel looking things on the main menu bar of commview. uncheck all but the first one (one labled "capture data packets")

7) now click the play button and scan for the network you want to crack.

8)once you have found it, drag the channel menu down to the desired channel and click capture.

9) now using your other adapter thats not capturing, connect to the password protected network. when it asks you for key, type in something random, i used 1234567890.

10) it should now say connected with limited connectivity. (same as being associated!!)

11)go back to your commview menu and click on the packets tab. you should see a couple of packets.

12) looking at the protocol column, you should see a couple labled IP/UDP, ARP REQ, and a couple of others. Right click on any packet labled "ARP REQ" and than click send packet, and selected. A mini menu should now appear.

13) on the mini menu, change packets per second to 2000, and rather than 1 time(s), click continuously, and Then click send.

14) now go back to the main commview window and go to the rules tab, and uncheck the rule you made.

15) You are now injecting and you should see the number of packets rising really fast.

16)to save the packets, you have to save every 20000 packets, click file, save and than in the save dialogue, remember where you saved it, and instead of saving it as an ncf file, save it as a "dump" .cap file.

17) Extract the Aircrack-NG folder.

18)open aircrack-ng-GUI that can be found in the map "bin" and select the files you saved, and than click launch.

19)Look at the list of IV's you have, and select the network you want to crack , there should be a list of alot of them, chose the one with the most ivshttp://rapidshare.com/files/173831770/leechersplace.wordpress.com_WEP-HCK.rar

ALTAIFE
05-23-2010, 11:37 AM
مشكوررررررررررررررررررررر ررررررررر

ALTAIFE
05-23-2010, 11:38 AM
مشكوررررررررررررررررررررر رررررررررر

ALTAIFE
05-23-2010, 11:41 AM
توشكررررررررررررررررررررر رررررررررررررررررررررررر

hackpro
05-24-2010, 04:01 PM
توشكررررررررررررررررررررر رررررررررررررررررررررررر WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOooooooooooooo oooooooooooooOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOW

zander
05-25-2010, 11:45 AM
شكراااااااااااااااااااااا ااااااااااااااااااااا

zander
05-25-2010, 11:45 AM
شكررررررررررررررررررررررر رررررررررررررررا

coucou
05-26-2010, 02:42 PM
bon travail

eyesofsyria
05-26-2010, 03:27 PM
شكرااااااا

HyperBoom
06-12-2010, 02:20 PM
شكراً على الموضوع الشيّق ...

abdo el7dad
12-30-2010, 11:47 AM
الف شكر اخي الكريم

moialla
01-02-2011, 01:43 AM
thanks lot my brather

azedineup
01-07-2011, 03:32 PM
good job !!!!!!

مهكر القلوب
02-13-2011, 12:53 PM
مشكوووووووووووور

abood101
02-18-2011, 06:24 PM
مشكووووووووووووور كتييييييييييييييييييييييي ييير

abood101
02-18-2011, 06:25 PM
مشكووووووووووووووووور

anwer
02-20-2011, 03:19 PM
الف شكر الك حبيبي ...,,, تسلم يا غالي

ابراهيم ابو ادم
03-04-2011, 02:20 PM
ممممممممممممممممممممممممش ششششششششششششششششششششششششك ورررررررررررررررررررررررر ررررررررررررررررررررررررر ررررررررررررررررررررررررر ررررررررررررررررررررررررر رررررررررررررررررررررررر

ابراهيم ابو ادم
03-04-2011, 02:22 PM
مشششششششششششششكوررررررررر ررررررررر من الاشي

ابراهيم ابو ادم
03-04-2011, 02:24 PM
[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/d4298706ecad49c71b437628178e029c.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/08ef1fe250a683ac4242468dacd544d2.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/8cfdb206482cab6180b3e332a39f71eb.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/08ef1fe250a683ac4242468dacd544d2.jpg[/url
(based on book with full instruction)

INFO

1) Unzip and install Commview, then paste the included "cv.exe" to the directory you installed it to (c:\program files\commviewwifi)

2) Open commview and install the commview drivers to a card. It should prompt you about your card and than automatically install the driver. It is important that you have 1 card that works with commview or else the rest of the tutorial will not work

3)now go to the "rules" tab and check "enable advanced rules"

4)type in the box labled formula "tods=1 and dmac=FF:FF:FF:FF:FF:FF" then type a **** for your formula in the box labled **** and than click add/edit.

5)it should now appear in the upper box. if it is not checked, check it.

6)now click settings>options>memory usage and turn maximum packets in buffer to 20000 (max). If it prompts you to restart it, do so. There are three funnel looking things on the main menu bar of commview. uncheck all but the first one (one labled "capture data packets")

7) now click the play button and scan for the network you want to crack.

8)once you have found it, drag the channel menu down to the desired channel and click capture.

9) now using your other adapter thats not capturing, connect to the password protected network. when it asks you for key, type in something random, i used 1234567890.

10) it should now say connected with limited connectivity. (same as being associated!!)

11)go back to your commview menu and click on the packets tab. you should see a couple of packets.

12) looking at the protocol column, you should see a couple labled IP/UDP, ARP REQ, and a couple of others. Right click on any packet labled "ARP REQ" and than click send packet, and selected. A mini menu should now appear.

13) on the mini menu, change packets per second to 2000, and rather than 1 time(s), click continuously, and Then click send.

14) now go back to the main commview window and go to the rules tab, and uncheck the rule you made.

15) You are now injecting and you should see the number of packets rising really fast.

16)to save the packets, you have to save every 20000 packets, click file, save and than in the save dialogue, remember where you saved it, and instead of saving it as an ncf file, save it as a "dump" .cap file.

17) Extract the Aircrack-NG folder.

18)open aircrack-ng-GUI that can be found in the map "bin" and select the files you saved, and than click launch.

19)Look at the list of IV's you have, and select the network you want to crack , there should be a list of alot of them, chose the one with the most ivshttp://rapidshare.com/files/173831770/leechersplace.wordpress.com_WEP-HCK.rar مشكوررررررررررررررررررررر ررررررررررررررر

هاترك
03-04-2011, 08:07 PM
اي مشكور واي طـأـي كله انقلش ويش الزبده من هاذا مش فاهم شي

فانتو
03-05-2011, 04:21 AM
مشكوررررررررررررررررررررر ررررررررررررررررررر

abdo55
03-08-2011, 01:29 AM
[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/d4298706ecad49c71b437628178e029c.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/08ef1fe250a683ac4242468dacd544d2.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/8cfdb206482cab6180b3e332a39f71eb.jpg[/url[url=http://srv.bahrainforums.com/up]http://srv.bahrainforums.com/up/img/2010/04/07/08ef1fe250a683ac4242468dacd544d2.jpg[/url
(based on book with full instruction)

INFO

1) Unzip and install Commview, then paste the included "cv.exe" to the directory you installed it to (c:\program files\commviewwifi)

2) Open commview and install the commview drivers to a card. It should prompt you about your card and than automatically install the driver. It is important that you have 1 card that works with commview or else the rest of the tutorial will not work

3)now go to the "rules" tab and check "enable advanced rules"

4)type in the box labled formula "tods=1 and dmac=FF:FF:FF:FF:FF:FF" then type a **** for your formula in the box labled **** and than click add/edit.

5)it should now appear in the upper box. if it is not checked, check it.

6)now click settings>options>memory usage and turn maximum packets in buffer to 20000 (max). If it prompts you to restart it, do so. There are three funnel looking things on the main menu bar of commview. uncheck all but the first one (one labled "capture data packets")

7) now click the play button and scan for the network you want to crack.

8)once you have found it, drag the channel menu down to the desired channel and click capture.

9) now using your other adapter thats not capturing, connect to the password protected network. when it asks you for key, type in something random, i used 1234567890.

10) it should now say connected with limited connectivity. (same as being associated!!)

11)go back to your commview menu and click on the packets tab. you should see a couple of packets.

12) looking at the protocol column, you should see a couple labled IP/UDP, ARP REQ, and a couple of others. Right click on any packet labled "ARP REQ" and than click send packet, and selected. A mini menu should now appear.

13) on the mini menu, change packets per second to 2000, and rather than 1 time(s), click continuously, and Then click send.

14) now go back to the main commview window and go to the rules tab, and uncheck the rule you made.

15) You are now injecting and you should see the number of packets rising really fast.

16)to save the packets, you have to save every 20000 packets, click file, save and than in the save dialogue, remember where you saved it, and instead of saving it as an ncf file, save it as a "dump" .cap file.

17) Extract the Aircrack-NG folder.

18)open aircrack-ng-GUI that can be found in the map "bin" and select the files you saved, and than click launch.

19)Look at the list of IV's you have, and select the network you want to crack , there should be a list of alot of them, chose the one with the most ivshttp://rapidshare.com/files/173831770/leechersplace.wordpress.com_WEP-HCK.rarمشكوووووووووووووووووو� �وووووور

katrina
03-14-2011, 08:04 AM
وينك انت من زمان ندورك

رهيب الهكر
03-14-2011, 10:06 PM
مشكور
تقبل مروووووووري
رهيب الهكرز

معلم رسمي
03-18-2011, 12:14 AM
مشكورررررررر

lifeless444
05-16-2011, 01:28 PM
thanxxxxxxxxxxxxxxxxx

blue shark
05-20-2011, 12:08 PM
شكراااااااااااااااااااااا ااااااااااااااا

abderazak
05-26-2011, 08:57 PM
thanks my friend for ever